Thermo Scientific LCQ Fleet Getting Started Manual page 3

Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations. When the system is delivered to you, it meets all pertinent
electromagnetic compatibility (EMC) and safety standards as described below.
Changes that you make to your system may void compliance with one or more of these EMC and safety standards.
Changes to your system include replacing a part or adding components, options, or peripherals not specifically
authorized and qualified by Thermo Fisher Scientific. To ensure continued compliance with EMC and safety
standards, replacement parts and additional components, options, and peripherals must be ordered from
Thermo Fisher Scientific or one of its authorized representatives.
This document contains the testing and evaluation results for these Thermo Scientific products:
• LCQ Fleet (March 2007)
• LXQ (February 2005)
• LTQ XL (September 2006)
• LTQ XL with the ETD module (January 2007)
• MALDI LTQ XL (August 2007)
EMC Directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
EMC compliance has been evaluated by TUV Rheinland of North America.
EN 55011:1998, A1: 1999, A2: 2002
EN 61000-3-2: 2000
EN 61000-3-3: 1995, A1: 2001
EN 61326-1: 1997, A1: 1998, A2: 2001, A3: 2003
EN 61000-4-2: 2001
FCC Class A, CFR 47 Part 15: 2005
Low Voltage Safety Compliance
Compliance with safety issues is declared under Thermo Fisher Scientific sole responsibility. This device complies with
Low Voltage Directive 73/23/EEC and harmonized standard EN 61010-1:2001.
Regulatory Compliance
LCQ Fleet (March 2007)
EN 61000-4-3: 2002
EN 61000-4-4: 1995, A1: 2000, A2: 2001
EN 61000-4-5: 1995, A1: 2001
EN 61000-4-6: 2003
EN 61000-4-11: 1994, A1: 2001
CISPR 11: 1998, A1: 1999, A2: 2002