Selecting the Appropriate Start Instrument
Thermo Scientific
By default, Xcalibur selects the configured autosampler as the start instrument for a
sequence run.
To ensure that the appropriate device is listed as the start instrument
1. On the Xcalibur Roadmap – Home Page, click the Sequence Setup button.
The Sequence Setup window appears.
2. Open the sequence that you want to run:
a. Choose File > Open.
The Open dialog box appears.
b. Browse to the appropriate folder, and then select a sequence file.
c. Click Open to open the sequence and exit the Open dialog box.
Sequence files are identified by their .sld file extension.
3. Choose Actions > Run Sequence or Actions > Run This Sample.
The Run Sequence dialog box appears. See
column indicates that the Surveyor Autosampler will be used as the start instrument once
the sequence run begins.
4
External Devices Controlled by the Xcalibur Data System
Figure
14. The Yes in the Start Instrument
LTQ Series Getting Connected Guide
Connecting External Devices
25