Connecting a Thermo Scientific LC System
Thermo Scientific
This chapter describes how to make the contact closure connections between a Surveyor
Plus™ or an Accela™ LC system and the LTQ Series MS detector.
Note The 7-connector LC/MS interconnect cable is described in this chapter. For
instructions on using the 5-connector LC/MS interconnect cable, refer to the Surveyor
Plus Getting Connected Guide.
For information on making the plumbing and back panel connections for a Thermo
Scientific LC system, refer to its getting connected manual.
Contents
•
Contact Closure Cables
•
Making Contact Closure with a Surveyor Plus LC System
•
Making Contact Closure with an Accela LC System
5
LTQ Series Getting Connected Guide
33