Table of Contents
Advertisement
3
Connecting the MALDI LTQ XL System
Connecting the MALDI Control Module to the MALDI LTQ XL System
Figure 9.
Connections between the left side of the MALDI LTQ XL system and the MALDI control module
MALDI LTQ XL system
(left-side panel)
Laser Comm
18
LTQ Series Getting Connected Guide
The following figures show the cable connections between the MALDI control module and
the MALDI LTQ XL system:
•
Figure 9
shows the four cable connections between the MALDI control module and the
left side of the MALDI sample module.
•
Figure 10
shows the power line connection between the MALDI control module and the
power entry panel on the right side of the LTQ XL MS detector.
•
Figure 11
shows the cable connection between the back side of the MALDI optics
module and the MALDI control module.
Sensors
Motors
CCD Camera
Laser Power
Laser power
cable
Motors cable
Sensor
cable
Laser
Power
Laser communications cable
MALDI control module
(rear panel)
CAUTION
MODEL:MALDI Laser Control Module
SERIAL No:
Aux.
Motors
Power
Finnigan MAT
PASS
Ground Continuity
and HPOT Tests
OFF
ON
Date:
By:
Power In
Vacuum Pump
From LTQ Accessory Outlet ONLY!
DISCONNECT
WARNING
Thermo Scientific
Hide quick links:
Advertisement
Table of Contents
