4
Connecting External Devices
External Devices Controlled by the Xcalibur Data System
26
LTQ Series Getting Connected Guide
Figure 14. Run Sequence dialog box with the Surveyor AS selected as the start instrument
4. Verify that the appropriate device is listed as the start instrument in the Acquisition
Options box.
5. If the appropriate device is not listed as the start instrument, change the starting device:
a. Click Change Instruments.
The Change Instruments In Use dialog box appears, with, for example, the
Surveyor Autosampler selected as the Start instrument. See
Figure 15. Change Instruments In Use dialog box with the Surveyor Autosampler selected
as the start instrument
Figure
15.
Thermo Scientific