Thermo Scientific LCQ Fleet Getting Started Manual page 30

3
Connecting the MALDI LTQ XL System
Connecting the MALDI LTQ XL Vacuum System
Figure 8. External connections between an MALDI LTQ XL system and its two forepumps
Power connection between the
primary forepump and the MS
detector power entry panel
Vacuum hose terminated with an 0-ring, plug,
and clamp
16 LTQ Series Getting Connected Guide
Figure 8 shows the vacuum hose connections for the two forepumps and the solenoid vacuum
valve connection between the secondary forepump and the MALDI control module.
MALDI LTQ XL system
(rear panel)
EDWARDS
30
Primary
forepump
Vacuum connection
between the MALDI sample
module and the secondary
forepump
EDWARDS
Oil Mist Filter EMF 20
Vacuum connection between the LTQ XL MS detector
and the primary forepump
Power connection between the
secondary forepump and the
MALDI control module
MALDI control module
(rear panel)
Solenoid
vacuum
valve
EDWARDS
Oil Mist Filter EMF 20
EDWARDS
30
Secondary
forepump
Thermo Scientific