Video Loss Screen - Siemens SISTORE AX9 250 User Manual

Configuration
8.7.3

Video Loss screen

54
Siemens Building Technologies
Fire Safety & Security Products
3. Highlight the desired box under the Spot Monitor heading, and press the
button.
A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects motions on
the selected camera.
You can save your Motion Detection changes by highlighting Save and
pressing the button.
Selecting Cancel exits the screen without saving the changes.
Highlight Video Loss in the Event menu and press the
The Video Loss setup screen appears.
Fig. 53 Video Loss Settings screen
The DVR checks to see if anything is obscuring the camera.
Settings
1. Highlight the slider bar beside Check Obscuration, and use the Left and
Right arrow buttons to adjust the setting.
The sensitivity can be set from "Never" to 255 (extremely sensitive).
2. Highlight the Actions 1 and Actions 2 tabs.
The Video Loss Actions 1 and Actions 2 screens display.
Fig. 54 Video Loss Actions 1 screen
button.
03.2007