8.11.1 Information screen
Siemens Building Technologies
Fire Safety & Security Products
Highlight Information in the System menu and press the
The Information screen appears.
In the Information screen, you can name the site location, assign a System ID
number, select the language the screens are displayed in, display software version
number, upgrade the software, import and export the setup, show the System Log,
display recorded time data, and clear all data.
Highlight the Site box and press the
A virtual keyboard appears that you can use to enter a Site Name.
Once you have entered your title, highlight Close and press the
Highlight the box beside System ID and press the
Change the number by highlighting it and using the Up and Down arrow
buttons to increase and decrease the number from 0 to 99.
The System ID number is used to identify the unit when it is connected with other DVRs through the
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485
network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as
they are not part of an RS485 network. If this is the case, all will be controlled at the same time when
using the infrared remote control.
Highlight the box beside Language and press the
A drop-down menu displays the available languages.
Highlight the desired language and press the
The box beside Version displays the software version of the DVR.