1.2.3
Software installation
1.2.4
Operation
1.2.5
Service and maintenance
1.3
Meaning of the hazard symbols
Siemens Building Technologies
Fire Safety & Security Products
Data loss after update
Make sure to backup all data before updating the device.
–
Electric shock or fire hazard
Never insert objects through the openings on the device.
–
Never spill liquid of any kind on the equipment.
–
Always unplug this equipment from the wall outlet before opening it (the
–
integrated power supply unit is not shielded).
Do not attempt to service this equipment yourself. Refer all servicing to qualified
–
service personnel.
Damage requiring Service
–
Unplug this equipment from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
When the power-supply cord or the plug has been damaged.
–
If liquid is spilled, or objects have fallen into the equipment.
–
If the equipment has been exposed to rain or water.
–
If the equipment does not operate normally by following the operating
–
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the
equipment to its normal operation.
If the equipment has been dropped, or the cabinet damaged.
–
When the equipment exhibits a distinct change in performance — this
–
indicates a need for service.
Upon completion of any service or repairs to this equipment, ask the service
–
technician to perform safety checks to determine that the equipment is in proper
operating condition:
Danger of electrical shock while cleaning the device
Unplug this equipment from the wall outlet before cleaning it.
–
Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
–
The nature of the hazard is indicated by icons.
Dangerous situation
Safety
13
03.2007