Siemens SISTORE AX9 250 User Manual page 62

Configuration
62
Siemens Building Technologies
Fire Safety & Security Products
Fig. 63 S.M.A.R.T. Setup screen
4. Highlight Enable, and press the
NOTE
If Enable is turned Off, you will not be able to make changes to any of the boxes.
5. Highlight the box beside Check Time, and press the
You can select from Monthly, Weekly and Daily. If you select Monthly, you will
be asked to set the Day of the Month and Time. If you select Weekly, you will
be asked to set the Day of the Week and Time. If you select Daily, you will be
asked to set the Time.
6. Highlight the first box beside Temperature Threshold, and press the
button.
7. Use the Up and Down arrow buttons to scroll through the numbers. Refer to
the hard disk drive manufacturer's documentation for the correct temperature
setting.
If the temperature of hard disk drive exceeds the defined threshold, the
system triggers an alert.
8. Highlight the second box beside Temperature Threshold, and press the
button.
9. Select either ºC (Celsius) or ºF (Fahrenheit), and press the
The box beside Last Check-Time displays the Date and Time of the last
S.M.A.R.T. check.
10. Highlight OK, and press the
Selecting Cancel exits the screen without saving the changes.
11. Highlight the Actions tab and the System Event Actions screen displays.
Fig. 64 System Event Actions screen
button to toggle between On and Off.
button to accept the changes.
button.
button.
03.2007