Siemens Building Technologies
Fire Safety & Security Products
Check Recording screen
Highlighting the box under the Interval heading beside each alarm-in and
button allows you to change the interval that you want the
DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30
days or Never.
Highlight the Storage tab and the Storage screen displays.
Highlight the box beside Disk Bad Notify, and press the
Select percentage level of bad disk sectors at which you want the DVR to
trigger an alert. Percentage levels range from 10% to 90%.
Highlight the box beside Disk Almost Full Notify, and press the
Select the percentage level of disk usage at which you want the DVR to
trigger an alert. Percentage levels range from 80% to 99%.
Highlight the Setup... box beside Disk S.M.A.R.T., and press the
The S.M.A.R.T. Setup screen appears.