Siemens Building Technologies
Fire Safety & Security Products
Upgrading the software
To upgrade the software, connect a USB device containing the upgrade package
file to the DVR.
Highlight Upgrade... and press the
The Upgrade screen appears.
The screen displays the upgrade package file names that are available. The
".rui" indicates that the file is for software upgrades and ".ofi" indicates that the
file is for optical drive firmware upgrades.
Select the desired file and press the
Highlighting the Install button and pressing the
selected software package. Highlighting the Cancel button and pressing the
button will close the window without upgrading the software.
If the upgrade package file is not installed on the DVR properly, you will get
an error message.
The system restarts automatically after completing the upgrade.
The Upgrade button will be deactivated if the hard disk drive has not been formatted as it requires the
space for temporary files when upgrading the system.
The USB device must be FAT16 or FAT32 format.
You can import saved DVR settings or export the current DVR settings.
To import saved DVR settings, connect the USB device containing the setup file
(.dat) to the DVR.
Highlight Setup – Import... and press the
Select the desired setup file and press the Import button to import the
selected settings and change the DVR settings accordingly.
Highlight Include Network Setup and press the
On and Off.
When set to Off, the network settings will not be changed.
Setup Import screen
button will install the
button to toggle between