Siemens SISTORE AX9 250 User Manual page 41

Siemens Building Technologies
Fire Safety & Security Products
NOTE
The local recording speed might be affected by various network bandwidth (Transfer Speed)
conditions.
7. Highlight the Mail tab, and the Mail screen displays.
The DVR can be set up to send an email when an event occurs.
Fig. 32 Mail setup screen
Mail
1. Highlight Enable and press the
You will only be able to change the settings if Mail is enabled.
2. Highlight the box beside SMTP Server and press the
3. Use the arrow buttons to enter the SMTP Server IP address obtained from
your system administrator.
4. Highlight the box beside Port and press the
5. Use the arrow buttons to enter the SMTP Server port number obtained from
your system administrator. The default port number is 25.
6. Highlight Use SSL/TLS and press the
Off.
When it is On, the DVR can send an email via an SMTP server requiring SSL
(Secure Sockets Layer) authentication.
7. Highlight the box beside Authentication and press the
An Authentication screen appears.
8. Highlight Use and press the
9. Highlight the box beside User/Password and press the
A virtual keyboard appears allowing you to enter the user ID and password.
Fig. 33 Authentication setup screen
10. Highlight the box beside Sender and enter the sender's e-mail address.
11. Use the virtual keyboard to enter the e-mail address.
button to toggle between On and Off.
button.
button to toggle between On and
button to toggle between On and Off.
Configuration
button.
button.
button.
41
03.2007