Siemens SISTORE AX9 250 User Manual page 36

Configuration
36
Siemens Building Technologies
Fire Safety & Security Products
When the DVR is in the Time & Event mode, the DVR will follow the Time
settings and the
icon displays.
5. Highlight the box under the Channels heading and press the
select which cameras will be recorded.
6. Highlight the box under the Settings heading and press the
define the recording settings.
You can set the ips and quality of the recording for any modes you set up in
the Mode column. If you do not set the ips and quality in the Settings column,
the DVR will follow the default settings. See below for details.
7. Highlight the box under the
recording settings.
You will be asked to confirm that you want to delete the settings.
8. Highlight Default... and press the
The Default screen appears.
Fig. 27 Default setup screen
Highlighting boxes under ips and pressing the
images per second for Time and Event recording. You can select from 0.10 to
25.0 (30.0 for NTSC) images per second.
Highlighting boxes under Quality and pressing the
the recorded image quality for Time and Event recording. You can select
from: Very High, High, Standard and Low.
You can save your changes by highlighting OK and pressing the
Selecting Cancel exits the screen without saving the changes.
icon displays. The DVR follows the Event settings and the
heading and press the
button.
button to
button to
button to delete the
button allows you to set the
button allows you to set
button.
03.2007