Remote Control Screen - Siemens SISTORE AX9 250 User Manual

Table of Contents

Advertisement

Configuration
8.9.4

Remote Control screen

72
Siemens Building Technologies
Fire Safety & Security Products
The Range box allows you to set the time that the alarm schedule will be active in
15-minute increments from 00:00 to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time.
When set to On, the Alarm-Out is active during the scheduled time. When set to
Event, the Alarm-Out is only active when there is an Event during the scheduled
time.
The Channels box allows you to set which alarm outputs will be active. You can
also select the DVR's internal buzzer.
The
box allows you to delete an alarm output schedule. You will be asked to
confirm whether or not you really wish to delete the schedule.
You can save your Alarm-Out changes by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
Highlight Remote Control in the Devices menu and press the
The Remote Control setup screen allows you to select a port and make correct
settings for a remote keyboard.
Fig. 79
Remote Control setup screen
1.
Highlight the box beside Port and select from None, RS232 and RS485.
If the RS232 port and RS485 port are in use for PTZ control, networking or
text input, the remote keyboard cannot be configured.
2.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and
Stop Bits for the device you are connecting to the DVR.
3.
Highlight the box beside Remote Control Product and select the device from
the list.
You can save your Remote Control settings by highlighting Save and
pressing the
button.
Selecting Cancel exits the screen without saving the changes.
button.
03.2007

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sistore ax9 200Sistore ax16 250Sistore ax16 200

Table of Contents