Siemens SISTORE AX9 250 User Manual page 59

Siemens Building Technologies
Fire Safety & Security Products
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
2. Highlight the box under the Alarm-Out heading and press the
A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with the Text Input as you wish.
When the DVR detects text input, it triggers output signals on all the
associated Alarm-Out connectors. You can also have the DVR's internal
buzzer sound if text input is detected.
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
3. Highlight the box under the Notify and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
4. Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 59 Text-In Actions 2 screen
Actions 2
1. Highlight the desired box under the PTZ heading, and press the
A list of PTZ presets appear.
2. Select the preset positions for each PTZ camera, where you want PTZ
cameras to move to when the DVR detects text input.
button.
button.
button to accept your changes.
Configuration
button.
button.
59
03.2007