Connecting the power cord
Siemens Building Technologies
Fire Safety & Security Products
Power cord connector
Connect the AC power cord to the DVR and then to a wall outlet.
Route power cords so that they are not a tripping hazard. Make certain the power cord will not be
pinched or abraded by furniture. Do not install power cords under rugs or carpet.
The power cord has a grounding pin. If your power outlet does not have a grounding pin receptacle,
do not modify the plug.
Do not overload the circuit by plugging too many devices in to one circuit.
Your DVR is now ready to operate. Refer to Sections 8: Configuration and