Motion Detection screen
Siemens Building Technologies
Fire Safety & Security Products
Highlight Motion Detection in the Event menu and press the
The Motion Detection setup screen appears.
Motion Detection Settings screen
Your DVR has built-in video motion detection. Video motion detection can be
turned On or Off for each camera.
Highlighting the box under the Sensitivity heading and pressing the
allows you to adjust the DVR's sensitivity to motion for Daytime and Nighttime
independently. There are five settings with 1 being the least sensitive and 5 being
the most sensitive.
Motion Detection Sensitivity screen
You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Highlighting the box under the Min. Blocks heading and
button allow you to adjust the minimum number of detection blocks
for Daytime and Nighttime independently. Smaller numbers provide greater
sensitivity because fewer detection blocks must be activated.
Motion Detection Min. Blocks screen
Turning Zone View On will allow you to observe how the DVR is reacting to
motion. When in the motion viewing mode, the detection zone of video will be
displayed in green. Any detected motion within the zone will be displayed in red.