Connecting the video input
Connecting the loop-through video
Connecting the monitor
Connecting a VGA monitor
Your DVR can be used with either PAL or NTSC equipment.
You cannot mix PAL and NTSC equipment. For example you cannot use a PAL camera and an
Video input connectors
Connect the coaxial cables from the video sources to the BNC Video In
Video loop-through connectors
If you would like to connect your video source to another device, you can use the
Loop BNC connectors.
The Loop BNC connectors are auto terminated. Do not connect a cable to the Loop BNC unless it is
connected to a terminated device because it will cause poor quality video.
Video Out connectors
Connect the main monitor to the Video Out connector.
Connect the spot monitor to the SPOT connector as needed.