Also See for Siemens SISTORE MX
Siemens SISTORE MX Installation Manual
314 pages
Siemens SISTORE MX User Manual
136 pages
Related Manuals for Siemens SISTORE MX
-
DVR Siemens SISTORE AX9 250 User Manual
(122 pages)
-
DVR Siemens SISTORE AX9 User Manual
Cctv fire & security products (92 pages)
-
DVR Siemens SISTORE AX4 Lite 250/100 V2.0 User Manual
Digital video recorder sistore ax4 lite 250/100 (182 pages)
-
DVR Siemens SISTORE AX8 250/100 V2.8 Installation Manual
(208 pages)
Summary of Contents for Siemens SISTORE MX
- Page 1 SISTORE MX SISTORE MX DVD SISTORE MX 3G SISTORE MX 3G DVD Hybrid Video Recorder Installation Manual (EN) V2.80 Building Technologies Fire Safety & Security Products...
-
Page 2: About This Document
About this document This document contains instructions for the installation of SISTORE MX and SISTORE MX 3G units. For information on configuration please refer to the Configuration Manual. For information on operation please refer to the User Manual. -
Page 3: Table Of Contents
Trigger and digital inputs.................19 6.2.4 Digital outputs ..................19 Behaviour with overheating..............20 Description of SISTORE MX 3G / MX 3G DVD........21 Connections und displays on the front side of the device ......21 Connections on the back of the device...........22 7.2.1 Trigger and digital inputs.................23 7.2.2... - Page 4 Subsequent installation of software components........54 Software (SISTORE RemoteView ............56 10.1 System requirements ................56 10.2 Installing SISTORE RemoteView............57 10.3 Updating SISTORE RemoteView ............59 10.4 Subsequent installation of software components........60 System limits ..................60 Disposal ....................60 Siemens Building Technologies Fire Safety & Security Products 02.2009...
-
Page 5: Safety
This is a Class A device. This equipment may cause radio interference in a residential installation. In this case the user is encouraged to perform appropriate measures to correct the interference. Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 6: Service And Maintenance
There is a risk of minor to medium injuries or damage to property. IMPORTANT Malfunctioning may result Meaning of the hazard symbols The nature of the hazard is indicated by icons. Warning of a hazard Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 7: Eu Directives
EU directives EU directives This product complies with the requirements of the following European directives. The EU declaration of conformity is available to the responsible agencies at: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG 76187 Karlsruhe Germany European Directive 2004/108/EC „Electromagnetic Compatibility”... -
Page 8: Technical Data
Technical data Technical data SISTORE MX / MX DVD SISTORE MX 3204 SISTORE MX 3208 - 3232 with 4 video inputs with 8, 16 or 32 video inputs Recording speed Max. 50 fps, Max. 100 fps, configurable for analogue cameras configurable for analogue cameras Max. - Page 9 Electrical isolation Up to 2500 V SISTORE MX systems are configured for DHCP by default. If there is no DHCP server in the network, select the menu sequence Administration> Configuration, then click the button TCP/IP parameters in the Network tab and enter a permanent IP address instead of DHCP.
-
Page 10: Sistore Mx 3g / Mx 3g Dvd
Max.: 4 SATA hard disks (1 TB max. each) Memory capacity SISTORE MX 3G: 1000 – 4000 GB data memory SISTORE MX 3G DVD: 1000 – 3000 GB data memory External storage media Via network connection Display resolution 1024 x 768, 1280 x 1024, 1920 x 1200... - Page 11 Electrical isolation Up to 2500 V SISTORE MX systems are configured for DHCP by default. If there is no DHCP server in the network, select the menu sequence Administration> Configuration, then click the button TCP/IP parameters in the Network tab and enter a permanent IP address instead of DHCP.
-
Page 12: Details For Ordering
100 ips analog, 100 ips digital, with DVD * Unit incl. packing material, accessories that are included in the delivery, and documentation All SISTORE MX models have enabled video output and SCSI functions and are delivered without keyboard. The part number (PN) of your SISTORE unit will be found on the rating plate on the bottom of the unit. - Page 13 1.2 kg (GAA/ATM) cash box or access control systems SISTORE MX hard drive 2GF4811-8CD For the expansion of SISTORE MX as of V2.50 0.8 kg expansion kit 250 GByte SISTORE MX hard drive S24245-B5093-A1 For the expansion of SISTORE MX as of V2.50 0.8 kg...
-
Page 14: Sistore Mx 3g / Mx 3g Dvd
11.7 kg * Unit incl. packing material, accessories that are included in the delivery, and documentation All SISTORE MX models have enabled video output functions and are delivered without keyboard. The part number (PN) of your SISTORE unit will be found on the rating plate on the bottom of the unit. -
Page 15: Package Contents
SISTORE unit Mouse Mains cable 8 x digital I/O connector (SISTORE MX 3204) 14 x digital I/O connector (SISTORE MX 3208 - 3232) Activation form CD with the SISTORE MX application software and complete documentation Installation Manual SISTORE MX 3G / MX 3G DVD... -
Page 16: Description Of Sistore Mx / Mx Dvd
Description of SISTORE MX / MX DVD Connections und displays on the front side of the device Fig. 1 Front side of SISTORE MX 3204 and SISTORE MX 3208 - 3232 LED displays on the front side of the device Power... -
Page 17: Connections On The Back Of The Device
Description of SISTORE MX / MX DVD Connections on the back of the device 6.2.1 SISTORE MX 3204 8 9 10 Fig. 2 Back side of SISTORE MX 3204 Video output 2 video outputs, 50 Hz/60 Hz Connect the same type of unit here as that on the video inputs (PAL, for example), since otherwise it is not possible to operate the video outputs. -
Page 18: Sistore Mx 3208 - 3232
SISTORE MX 3208 - 3232 8 9 10 Fig. 3 Back side of SISTORE MX 3208 - 3232 Video output 4 video outputs, 50 Hz/60 Hz Connect the same type of unit here as that on the video inputs (PAL, for example), since otherwise it is not possible to operate the video outputs. -
Page 19: Trigger And Digital Inputs
Trigger and digital inputs The HVR is equipped with optocoupler that run the TTL-compatible trigger inputs of the SISTORE MX via optocoupler and enable the switching of signal levels up to 24 V. The inputs of the optocoupler are designed for a voltage range of 5 to 24 V. -
Page 20: Behaviour With Overheating
Description of SISTORE MX / MX DVD Behaviour with overheating If the Error LED on the front of the device lights yellow, there are two possible causes: Overheating of the hard drive The running application cannot be stopped. A new application cannot be started. -
Page 21: Description Of Sistore Mx 3g / Mx 3g Dvd
Description of SISTORE MX 3G / MX 3G DVD Connections und displays on the front side of the device Fig. 6 Front side of SISTORE MX 3G / MX 3G DVD LED indicators when the device is switched on Video inputs 1 – 16... -
Page 22: Connections On The Back Of The Device
Connections on the back of the device Fig. 7 Back side of SISTORE MX 3G / MX 3G DVD Damage to the device and impairment of electrical safety When voltages are applied to the digital inputs/outputs the device may be damaged and electrical safety may be impaired. -
Page 23: Trigger And Digital Inputs
Description of SISTORE MX 3G / MX 3G DVD 7.2.1 Trigger and digital inputs The HVR is equipped with optocouplers that enable the connection of floating contacts. The contacts will be triggered when the inputs are shorted. The switching voltage of the switches is 5 V ±10 %, with a max. switching current of 5 mA. -
Page 24: Installation
Place the device on the mounting rails and push it into the cabinet. Attach the unit with the four M6x18 screws and plastic washers to the mounting rails of the network cabinet (see F ig. 10). 7 6 H Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 25: Tabletop Operation
Installation Fig. 10 SISTORE MX rack installation (top view) Cabinet type Rittal TS SISTORE unit Corner bracket 2HE complete for MX 19” rack installation End-to-end mounting rail 461 mm for PS Flat-head screw, ISO 7045-M4x12-H-ZN Flat-head screw, ISO 7045-M6x18-H-ZN Washer DIN 125-A-6, 4-PA... -
Page 26: Setting Dip Switches (sistore Mx / Mx Dvd)
Installation Setting DIP switches (SISTORE MX / MX DVD) Fig. 11 DIP switches All DIP switches are set to on by default, i.e. the video inputs are terminated with 75 Ohm. If the signals are to be looped through the DIP switches must be set to off. - Page 27 VIN5 VIN6 VIN7 VIN8 75 Ohm termination Dipsw Assignment VIN21 VIN22 VIN23 VIN24 75 Ohm termination Dipsw Assignment VIN1 VIN2 VIN3 VIN4 75 Ohm termination Dipsw Assignment VIN17 VIN18 VIN19 VIN20 Siemens Building Technologies Fire Safety & Security Products 02.2009...
-
Page 28: Examples Of System Design
D escription of SISTORE 7 9 H 8 0 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 8 1 H 8 2 H Siemens Building Technologies Fire Safety & Security Products... -
Page 29: Connecting Control Panel Cka4810
D escription of SISTORE 8 3 H 8 4 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 8 5 H 8 6 H Prerequisite: The CKA driver is installed and the icon is displayed in the task bar. -
Page 30: Sistore Remote View
D escription of SISTORE 9 3 H 9 4 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 9 5 H 9 6 H Prerequisite: The CKA driver is installed and the icon is displayed in the task bar. -
Page 31: Connecting Control Panel Cka4820
D escription of SISTORE 1 0 0 H 1 0 1 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 1 0 2 H 1 0 3 H Prerequisite: The CKA driver is installed and the icon is displayed in the task bar. -
Page 32: Sistore Remote View
D escription of SISTORE 1 0 9 H 1 1 0 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 1 1 1 H 1 1 2 H Prerequisite: The CKA driver is installed and the icon is displayed in the task bar. -
Page 33: Connecting The Multimedia Control Panel (sistore Mx / Remoteview)
1 1 7 H 1 1 8 H Siemens Building Technologies Fire & Security Products GmbH & Co. oHG. It can be ordered from Contour Design Ltd. (www.contourdesign.com) (product name: ShuttlePRO2). The Multimedia Control Panel has been integrated and tested with SISTORE MX. Siemens Building Technologies Fire &... - Page 34 1 1 9 H 1 2 0 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 1 2 1 H 1 2 2 H Installing the software for the Multimedia Control Panel...
- Page 35 Installation The following dialog box opens. Click LAUNCH SETUP. The following dialog box opens. Click Next. Siemens Building Technologies Fire Safety & Security Products 02.2009...
- Page 36 Yes, I agree with all the terms of this license agreement Click Next The following dialog box opens. Click Next to install the software in the default directory. The following dialog box opens. Siemens Building Technologies Fire Safety & Security Products 02.2009...
- Page 37 The software will be installed. The following dialog box opens. 11. Mark the checkbox Open the Contour Control Panel. 12. Click Finish. The software has been installed. dialog box appears. Contour Shuttle Device Configuration Siemens Building Technologies Fire Safety & Security Products 02.2009...
- Page 38 Installation Configuring the Multimedia Control Panel Fig. 19 Contour Shuttle Device Configuration Click Options. The following context menu will open: Select Import settings in the context menu. Siemens Building Technologies Fire Safety & Security Products 02.2009...
- Page 39 The Multimedia Control Panel is ready for operation. Information on the operation of the SISTORE MX, SISTORE RemoteView and SISTORE Player application software using the Multimedia Control Panel can be found in the SISTORE MX User Manual. Siemens Building Technologies Fire Safety &...
-
Page 40: Connecting The Siemens Lan Camera Ccix1345
Install the Siemens LAN camera CCIx1345. Further information on this can be found in the installation manual for the camera. Configure alarm activation for the Siemens LAN camera CCIx1345. Further information on this can be found in the SISTORE MX Configuration Manual. Siemens Building Technologies Fire Safety & Security Products... -
Page 41: Connecting The Ccda1425 Dome Camera
Choose the camera type from the first list box. Choose the interface from the second list box. Click Apply. The interface for the dome camera is enabled. Further information on this can be found in the SISTORE MX Configuration Manual. Connections Signal... -
Page 42: Connecting The Ccda1435 Dome Camera
Choose the interface from the second list box. 10. Click Apply. The interface for the dome camera is enabled. Further information on this can be found in the SISTORE MX Configuration Manual. Siemens Building Technologies Fire Safety & Security Products... -
Page 43: Connecting Pan-and-tilt Unit Pt40
Choose the camera type from the first list box. Choose the interface from the second list box. Click Apply. The interface for the camera is enabled. Further information on this can be found in the SISTORE MX Configuration Manual. Connections Signal... -
Page 44: Connecting Pan-and-tilt Unit Cdd2410
Choose the camera type from the first list box. Choose the interface from the second list box. Click Apply. The interface for the camera is enabled. Further information on this can be found in the SISTORE MX Configuration Manual. 8.4.9 Connecting SCU pan-and-tilt unit PT40P via controller CDC050x... -
Page 45: Connecting Scu Pan-and-tilt Unit Via Controller Cdcd2417
1 5 8 H 1 5 9 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 1 6 0 H 1 6 1 H Connect the pan-and-tilt units via controller CDCD2417 to the RS485 port (COM2) of the SISTORE (see F ig. -
Page 46: Connecting The Mx Multi-channel Box Rci 0601
For a more detailed description of the connections please refer to Section 6 Description of SISTORE MX / MX DVD or Section 7 Description of SISTORE MX 3G / MX 3G DVD. Connect the MX Multi-Channel Box to the SISTORE unit (see Fig. 27). -
Page 47: Connecting Kebin Access Readers
1 6 8 H 1 6 9 H MX / MX DVD or Section D escription of SISTORE MX 3G / MX 3G DVD. 1 7 0 H 1 7 1 H Connect the MX Multi-Channel Box to the SISTORE (see F ig. -
Page 48: Connecting Miniter Interface And Access Reader
Installation 8.4.12 Connecting Miniter interface and access reader Fig. 29 System overview: SISTORE MX – interface und access reader (Miniter) Cable (9-pin), plug-plug 2-3, 3-2 Null-modem cable (9-pin), plug-plug 2-3, 3-2, 4-6, 5-5, 6-4, 7-8, 8-7 For a more detailed description of the connections please refer to Section... -
Page 49: Connecting Cash Box Systems
For a more detailed description of the connections please refer to Section 6 Description of SISTORE MX / MX DVD or Section 7 Description of SISTORE MX 3G / MX 3G DVD. Connect the MX Multi-Channel Box(es) to the SISTORE unit (see Fig. 30). -
Page 50: Sistore Unit - Cka4820 - Sistore Remoteview - Lan Cameras
Installation 8.4.14 SISTORE unit – CKA4820 – SISTORE RemoteView – LAN cameras Fig. 31 SISTORE MX – CKA4820 – SISTORE RemoteView – LAN cameras system overview CKA4820 optional SISTORE unit Client PC with RemoteView SISTORE MX: max. 64 LAN cameras various manufacturers SISTORE MX 3G: max. - Page 51 Installation CKA4820 interface configuration Protocol: SIMATRIX RS232 or SIEMENS IVM Baud rate: 9600 Parity: None If you want to connect the CKA4820 control panel to a SISTORE via the internal COM1A interface, install the RS-232C/RS-485 interface converter into the connection line (see F ig.
-
Page 52: Software (sistore Unit)
If you run an active virus scan, the recording process may be stopped, resulting IMPORTANT in a loss of data. Run the virus scan after recording has stopped. Software operation using the virtual keyboard Fig. 32 Password entry using the virtual keyboard Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 53: Updating Or Repairing Software
Entries into all other input fields of the system are made in the same manner. Updating or repairing software You may have to reinstall or repair the SISTORE MX application software on a SISTORE unit or on a client PC in case components of the software are damaged. -
Page 54: Subsequent Installation Of Software Components
IMPORTANT Install only software products on the SISTORE that have been approved by the manufacturer. Software components of the SISTORE MX application software can be subsequently installed on the SISTORE unit. Place the installation CD in the CD drive. Launch SISTORE_MX_280.exe. - Page 55 Mark the appropriate checkbox(es). Click Next. The following dialog box opens. Select the option Yes, I want to restart my computer now. Click on Finish. The selected software component has been installed. Siemens Building Technologies Fire Safety & Security Products 02.2009...
-
Page 56: Software
Min. 2 USB ports (2.0) Internet Explorer 6.x or higher Monitor with min. 17-inch screen Display resolution 1024 x 768 or 1280 x 1024 pixels Optional: Laser printer or inkjet printer Optional: CD/DVD burner Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 57: Installing Sistore Remoteview
Launch the file SISTORE_MX_RemoteView_280.exe by double clicking on it. The following dialog box opens. Select the desired language and click OK. The following dialog box opens. Click Next. Siemens Building Technologies Fire Safety & Security Products 02.2009... - Page 58 The following dialog box opens. Click Next. The following dialog box opens. Select RemoteView and click Next. The Select program folder dialog box opens. Do not change the destination folder. Click Next. Siemens Building Technologies Fire Safety & Security Products 02.2009...
-
Page 59: Updating Sistore Remoteview
Launch the file SISTORE_MX_RemoteView_280.exe. The following dialog box opens. Select the option Update. Click Next. The update will be performed automatically. It is not necessary to restart your computer after completion of the update. Siemens Building Technologies Fire Safety & Security Products 02.2009... -
Page 60: Subsequent Installation Of Software Components
..Fig. 33 SISTORE MX system in multi-server mode Up to 32 analog camera can be connected to each SISTORE unit. Each SISTORE unit can connect to up to 64 LAN cameras. Each SISTORE RemoteView station can connect to up to 10 SISTORE units at the same time. - Page 62 Issued by © 2009 Copyright by Siemens Building Technologies Siemens Building Technologies Fire & Security Products GmbH & Co. oHG Data and design subject to change without notice. D-76181 Karlsruhe Supply subject to availability. Printed in the Federal Republic of Germany www.buildingtechnologies.siemens.com...
Comments to this Manuals
Latest comments: