Audio Setup Screen - Siemens SISTORE AX9 250 User Manual

Configuration
8.9.2

Audio setup screen

70
Siemens Building Technologies
Fire Safety & Security Products
6. Configure the port's setting based on the PTZ camera manufacturer's
instructions.
You can save your Camera changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
Highlight Audio in the Devices menu and press the
The Audio setup screen appears.
Fig. 76 Audio setup screen
The DVR can record up to four audio inputs.
1. Highlight the box beside the input and press the
A list of cameras appears, and you can select the camera associated with that
audio input.
2. Highlight Enable Audio-Out and press the
This toggles between enabling and disabling audio out.
NOTE
The DVR will not record audio when the recording speed is set to less than 1 ips.
You can save your Audio setup by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
button.
button.
button.
03.2007