Siemens SISTORE AX9 250 User Manual page 74

Configuration
74
Siemens Building Technologies
Fire Safety & Security Products
NOTE
A USB hard disk drive (2.0 or higher version only) can be formatted and used only for archiving.
NOTE
System upgrades require formatting internal hard disk drives, so do not uninstall internal hard disk
drives even though they are not used for either recording or archiving; e.g., when using only external
SCSI hard disk drives. Set the Use As for the internal hard disk drive to Not Using and format it.
The Information column displays whether the device is being used or not. "Other"
indicates the device has been used for another DVR.
Highlight the box in the Information column for the desired storage device and
press the button.
You will be able to check the time information about recorded data.
Fig. 83 Device Information screen
If you want to erase recorded data on the selected device, highlight Clear and
press the button. You will be asked whether or not you want to delete the data.
If you want to use a USB hard disk drive, highlight Use and press the
after connecting the device. Highlight Don't Use and press the
want to stop using the device.
NOTE
When disconnecting a USB hard disk drive from the DVR, highlight Don't Use first and then
disconnect the device.
NOTE
Do not disconnect the USB cable or the power from the device while copying video clips. If the USB
cable is disconnected while copying video clips, archived data might be lost.
button
button if you
03.2007