Download  Print this page

Turning On The Power; Initial Unit Setup - Siemens SISTORE AX9 250 User Manual

Hide thumbs

Advertisement

8.2

Turning on the power

8.3

Initial unit setup

Siemens Building Technologies
Fire Safety & Security Products
Connecting the power cord to the DVR turns on the unit. The unit takes
approximately 60 seconds to initialize.
Before using your DVR for the first time, you will want to establish the initial
settings. This includes items such as time and date, display language, camera,
audio, remote control, record mode, network and password. Your DVR can be set
up using various screens and dialog boxes.
Throughout the screens you will see
button gives you the opportunity to reset that screen to its default settings.
1.
Press the Menu button to enter the setup screens.
The Login screen appears.
Fig. 21
Login screen
2.
Select a User and enter the password by pressing the appropriate
combination of Camera number buttons and then the
There is no default password when logging in the admin user for the first time.
NOTE
To assure the secure management of the system, setting up a password is strongly recommended.
NOTE
You can use a mouse (not supplied) to access the Login screen in addition to using the front panel
buttons or the infrared remote control. Click the right mouse button to display the Login screen. To
enter a password, click the
...
using the virtual keyboard.
. Highlighting the
button, and the virtual keyboard displays. See instructions below for
Configuration
and pressing the
button.
31
03.2007

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: