Configuration
8.6.3
Modem setup
46
Siemens Building Technologies
Fire Safety & Security Products
Highlight Modem in the Network menu and press the
The Modem setup screen displays.
Fig. 39
Modem setup screen
NOTE
If the RS232 port is in use for remote control, networking cannot be configured for a modem.
1.
Highlight Enable and press the
You will only be able to change the settings if Modem is enabled.
2.
Highlight the box beside Baud Rate and press the
A list of baud rates ranging from 300 to 115,200 appears.
3.
Highlight the box beside Data Bit and press the
4.
Choose between 7 bit and 8 bit formats.
5.
Highlight the box beside Stop Bit and press the
6.
Choose between 1 and 2 Stop Bits.
7.
Highlight the box beside Parity and press the
A drop-down list appears. You can select from None, Odd or Even parity.
button.
button to toggle between On and Off.
button.
button.
button.
button.
03.2007