Siemens Building Technologies
Fire Safety & Security Products
Alarm-In Actions 1 screen
You can set the actions the DVR will take whenever it senses an input on one of its
alarm input connectors.
Highlight the desired box under the Record heading, and press the
A list of cameras appears.
Select the cameras that you want the DVR to record whenever it detects an
input on the associated alarm input.
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
Highlight the desired box under the Alarm-Out heading, and press the
A list of Alarm Outputs and Beep appear.
Select the Alarm Output connectors that you would like to activate whenever
the DVR detects an input on the associated alarm input.
You can also set the DVR's internal buzzer to sound.
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the
The Alarm-In Notify menu appears.
Alarm-In Notify menu