Siemens SISTORE AX9 250 User Manual page 103

Siemens Building Technologies
Fire Safety & Security Products
3. Highlight the box beside Type and press the
You can select between Motion Search and Museum Search. Motion Search
detects motion in the defined area. Museum Search detects if a defined object
has moved.
4. Highlight the box beside Zone and press the
An image from the video appears with a grid overlaid.
You can turn sensor blocks On and Off to define the area of the picture in
which you want to search for motion.
NOTE
Defining the area of the image in which you want to search for motion is nearly identical to setting up
the DVR for Motion Detection. Please refer to the Motion Detection screen in Section 8:
Configuration for more detailed instructions on setting up the detection blocks.
NOTE
When setting the Museum Search Zone, the zone should be placed inside of the border line of the
target object. If the selected block is placed on the boarder line, the sensitivity of the Museum Search
may decrease.
The zone should be placed or focused on the centre or, at least, within the
outline of targeted object.
5. Highlight the box beside Sensitivity and press the
You will be able to select from 1 (low sensitivity) to 5 (high sensitivity).
6. Highlight the box beside Min. Blocks and press the
You will be able to set the number of sensor blocks that must be activated.
Setting the Min. Blocks will only be available if Motion Search is selected.
Once you set your desired search conditions, highlight Search and press the
button to display the search results in the Motion Search screen.
Selecting Cancel exits the screen without saving the changes.
When you search for motion events of another camera, you will be asked whether
or not you want to delete the previous search results from the list.
Operation
button.
button.
button.
button.
103
03.2007