8.11.2 Date/Time setup
Siemens Building Technologies
Fire Safety & Security Products
Highlight Date/Time in the System menu and press the
The Date/Time setup screen appears.
Fig. 91
Date/Time setup screen
Date/Time
1.
Highlight the first box beside Date and press the
The individual sections of the date will highlight.
Use the Up and Down arrow buttons to change the number. Use the Left and
Right arrow buttons to move between month, date and year.
2.
Once you have the correct date, press the
3.
Highlight the Format box beside Date and press the
Select from the three available date formats and press the
your selected format.
4.
Highlight the first box beside Time and press the
The individual sections of the time will highlight.
Use the Up and Down arrow buttons to change the number. Use the Left and
Right arrow buttons to move between hour, minutes and seconds.
5.
Once you have the correct time, press the
6.
Highlight the Format box beside Time and press the
Select from the three available time formats and press the
your selected format.
NOTE
The clock will not start running until you have highlighted Save and pressed the
7.
Highlight the box beside Time Zone and press the
Select your time zone from the list and press the
8.
Highlight Use Daylight Saving Time and press the
Pressing the
button toggles between On and Off.
9.
Highlight the Holiday tab, and the Holiday setup screen appears
Configuration
button.
button.
button.
button.
button to save
button.
button.
button.
button to save
button.
button.
button.
button.
79
03.2007