Siemens SISTORE AX9 250 User Manual page 63

Siemens Building Technologies
Fire Safety & Security Products
Actions
The DVR can be set to react to system events. System events can be associated
with an Alarm-Out connector, sound the DVR's internal buzzer, and/or notify a
number of different devices.
1. Highlight the Alarm-Out box beside the desired event (Check Recording,
Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or
Disk S.M.A.R.T.), and press the
A list of Alarm Outputs appears. You can associate as many Alarm-Outs with
the Event as you wish.
If the DVR detects that event, it triggers output signals on all the associated
Alarm-Out connectors. You can also have the DVR's internal buzzer sound if
an event is detected.
NOTE
Alarm-Out action cannot be set to System and Panic Record events.
2. Highlight the Notify box beside the desired event (System, Panic Record,
Check Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk
Temperature, or Disk S.M.A.R.T.), and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
3. Highlight OK and press the
NOTE
Mail notify is the only option available for the System event.
NOTE
For the Notify action to work, the DVR should be registered in the RAS (Remote Administration
System).
You can save your System Event changes by highlighting Save and pressing
the button.
Selecting Cancel exits the screen without saving the changes.
button.
button.
button.
button to accept your changes.
Configuration
63
03.2007