Text-In Screen - Siemens SISTORE AX9 250 User Manual

Configuration
8.7.4

Text-In screen

56
Siemens Building Technologies
Fire Safety & Security Products
Actions 2
1. Highlight the desired box under the PTZ heading, and press the
A list of PTZ presets appear.
2. Select the preset position for each PTZ camera, where you want PTZ
cameras to move to when the DVR detects video loss on the selected
camera's input.
3. Highlight the box under the Spot Monitor heading and press the
A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects video loss
on the selected camera.
You can save your Video Loss changes by highlighting Save and pressing
the button.
Selecting Cancel exits the screen without saving the changes.
Highlight Text-In in the Event menu and press the
The Text-In setup screen appears.
Fig. 56 Text-In Settings screen
Settings
The DVR can be set to react to text input from devices such as ATMs (Automated
Teller Machines) and POS (Point of Sale; i.e., cash registers). This screen allows
you to configure the DVR for each text-in device.
1. Highlight the box under the Setup heading, and press the
Selecting the Setup heading changes all the parameters excluding Port
settings of all the text input channels.
NOTE
The system performance might be affected when a large quantity of text inputs are detected from
several channels at the same time.
button.
button.
button.
button.
03.2007