Archive Screen - Siemens SISTORE AX9 250 User Manual

Configuration
8.5.4

Archive screen

38
Siemens Building Technologies
Fire Safety & Security Products
Highlight Archive in the Record menu and press the
The Archive setup screen appears.
Fig. 29 Archive setup screen
1. Highlight Archive On and press the
NOTE
If you have not set up a storage device for archiving, a message appears notifying you of this.
2. Select the Days and Time Range you want archived.
You can accept the Archive Data Range by leaving the default checkmarks in
the Last Archived and Continue boxes.
If you wish to enter specific times and dates in From and To, toggle the
checkmarks Off and then enter the time and date.
3. Highlight Recycle and press the
When Recycle is On and the storage device is full, the newest archived video
data will overwrite the oldest archived data.
When Recycle is Off, the DVR will stop archiving video data until more space
is made available.
4. Highlight Summary Archive and press the
and Off.
When Summary Archive is On, the DVR does not archive recorded video in
full, but archives 1 or 2 ips from each channel. This will allow the DVR to
archive more recorded video and increase archive speed as well.
NOTE
If 15 or less ips have been recorded per channel 1 ips will be archived, and if 30 ips have been
recorded per channel 2 ips will be archived. If 16 to 29 ips have been recorded per channel, 1 or 2 ips
will be archived depending on the number of key frames recorded. The DVR will archive recorded
video in full when 1 or less ips has been recorded per channel.
NOTE
When Summary Archive is On, any data recorded below 15 ips will experience poor image quality.
Setting the recording speed 15 ips or higher is recommended during summary archiving.
button.
button to toggle between On and Off.
button to toggle between On and Off.
button to toggle between On
03.2007