2
Installation
2.1
Package Contents
2.2
Required Installation Tools
2.3
Setting Unit for PAL or NTSC
Siemens Building Technologies
Fire & Security Products
The package contains the following:
Digital video recorder
Adaptor (including power cord)
Alarm I/O board
Multilingual user's manual, multilingual RAS software and user's manual on CD-
ROM
CD-ROM
Multilingual quick reference guide
19 inch bracket
No special tools are required to install the DVR. Refer to the installation manuals
for the other items that make up part of your system.
Fig. 2
16-Channel DVR rear panel.
Fig. 3
PAL / NTSC switch.
Your DVR can be used with either PAL or NTSC equipment. Before turning on the
DVR, set the switch to P (PAL) or N (NTSC) to match your equipment.
NOTE:
You cannot mix PAL and NTSC equipment. For example you cannot use a PAL camera and an
NTSC monitor.
If you set the switch from PAL (NTSC) to NTSC (PAL), please do the Factory
CAUTION
Reset and Clear All Data. If not, it causes the DVR to perform wrong
operations.
Installation
13
SISTORE AX9 AX16_EN.doc
09.2004