Upgrading The Software - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

7.13.1.1 Upgrading the software

Siemens AG
NOTE
The System ID number is used to identify the unit when it is connected with other DVRs through the
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485
network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as
they are not part of an RS485 network. If this is the case, all will be controlled at the same time when
using the infrared remote control.
5. Highlight the box beside Language and press the
Î
A drop-down menu displays the available languages.
6. Highlight the desired language and press the
Î
The box beside Version displays the software version of the DVR.
To upgrade the software, connect a USB device containing the upgrade package file
to the DVR.
1. Highlight Upgrade... and press the
Î
The Upgrade screen appears.
The screen displays the upgrade package file names that are available. The
".rui" indicates that the file is for software upgrades.
2. Select the desired file and press the
Highlighting the Install button and pressing the
software package. Highlighting the Cancel button and pressing the
will close the window without upgrading the software.
Î
If the upgrade package file is not installed on the DVR properly, you will get an
error message.
Î
The system restarts automatically after completing the upgrade, and it takes
approximately one minute to restart.
Fig. 71 Upgrade screen
NOTE
z
The USB device must be FAT16 or FAT32 format.
z
Do NOT remove the USB device until after the DVR restarts, otherwise the system upgrade will not
be completed properly.
You can import saved DVR settings or export the current DVR settings.
button.
button.
button.
button.
button will install the selected
Configuration
button
69
06.2010