Summary of Contents for Keysight E8257D Option H1K
Page 1
Keysight Technologies E8257D Option H1K Notice: This document contains references to Agilent. Please note that Agilent’s Test and Measurement business has become Keysight Technologies. For more information, go to www.keysight.com. User's Guide...
The Keysight E8257D Option H1K provides extended low frequency coverage, with specified leveled output power up to +7 dBm from 100 kHz to 250 kHz. The Keysight E8257D Option 1EA or 1EU (high output power) is required with Option H1K.
Page 6
Power Meter None Keysight E4419A or E4419B Power Sensor None Keysight E9304A (9 kHz to 6.0 GHz) Keysight E9304A Option H19 (9 kHz to 18 GHz) E8257D Option 520 Microwave Amplifier 20 dB of Gain Keysight 83006A (0.01 GHz to 26.5 GHz)
Power Range 1: +7 dBm to -45 dBm 7. Read the power meter. If the power meter reading is 3 dB less than the power being used in Table 4 on page 8, verify the connections. You may abort or retest. Keysight E8257D Option H1K User's Guide...
Page 8
0.1 seconds. 9. Compare the Power Level Accuracy to the specification as follows: Equation 1-1 ± PLA (P ))-P 10. Set the power to +5 dBm and repeat step 8 step Keysight E8257D Option H1K User's Guide...
3. Perform a full Cal on the PSA and turn Auto Align to off. 4. Set the DUT to -45 dBm. Figure 2 –50 dBm and Below 5. Set the spectrum analyzer as listed in Table 3 on page Keysight E8257D Option H1K User's Guide...
Page 10
Auto Preamplifier Sweeptime Auto Trace Points FFT & Sweep Manual FFT FFTs/Span ADC Dither Detector Sample AVG/VBW Type Log-Pwr Avg Video Video Averaging Number Of Averages Table 4 Auto Align Single Sweep Input Coupling Keysight E8257D Option H1K User's Guide...
Page 11
15. Turn on the DUT RF Power. 16. Perform a sweep on the PSA and perform a Marker Normal, and Marker-peak-search. 17. Press Marker-to-reference level. 18. Turn on Marker Delta. 19. Set the DUT power to -50 dBm. Keysight E8257D Option H1K User's Guide...
Page 12
-55 dBm. 23. Decrease the DUT power by 5 dB. If necessary change the RBW and Video averages per Table 24. Repeat step 19 through step 23 for amplitude levels down to -90 dBm. Keysight E8257D Option H1K User's Guide...
Declaration of Conformity Declarations of Conformity for this product and for other Keysight products may be downloaded from the Keysight Regulatory Website. Click on "Declarations of Conformity" and enter your product number to find the latest Declaration of Conformity statement.
4 °C for every 100 watts dissipated in the cabinet. If the total power dissipated in the cabinet is greater than 800 watts, forced convection must be used. Keysight E8257D Option H1K User's Guide...
Allow all residual alcohol moisture to evaporate, and fumes to dissipate prior to energizing the instrument. To prevent electrical shock, d isconnect the Keysight E8257D Option H1K from mains electrical supply before cleaning. Use a dry cloth or one slightly dampened with water to clean the external case parts.
This symbol is used to identify a terminal which is internally connected to the product frame or chassis. The CE mark is a registered trademark of the European Community. The Keysight email address is required by EU directives applicable to our product. ccr.keysight@keysight.com The CSA mark is a registered trademark of the CSA International.
Regulatory Information Battery Collection Do not throw batteries away but collect as small chemical waste, or in accordance with your country’s requirements. You may return the battery to Keysight Technologies for disposal. Refer “Contacting Keysight” on page 16 for assistance.
1 MΩ of isolation from ground. These techniques for a static-safe work station should not be used when working on circuitry with a voltage potential greater than 500 volts. Keysight E8257D Option H1K User's Guide...
Contact Keysight for additional information on available service agreements for this product. Contacting Keysight Assistance with test and measurement needs, and information on finding a local Keysight office are available on the Internet at: http://www.keysight.com/find/assist You can also purchase accessories or documentation items on the Internet at: http://www.keysight.com/find...