Setup Menu: Alarm/Warning - Cisco D9824 Installation And Configuration Manual

Menu Item
BISS-E IID

Setup Menu: Alarm/Warning

To view the Alarm/Warning menu from the Main menu, press the RIGHT arrow
key once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key seven times and the SELECT key to view the Alarm/Warning menu.
The Alarm/Warning menu allows you to browse the active alarms and warnings,
and set whether the output will be disabled in the event of an alarm. This menu has
the following structure:
Menu Item
FP Alarm Reminder
Description
If BISS Mode is Mode E, enter the
injected ID.
Description
Select whether to display
alarms and warnings on the
front panel. The alarm indicator
will intermittently flash in the
lower line, if enabled.
Parameters
14-character password. Once
entered, it cannot be viewed and
it is only displayed as asterisks
(*).
Contact your program provider
for the session word.
Parameters
Enable or Disable
Setup Menu
125