Cisco D9824 Installation And Configuration Manual page 241

The CDT is different from the other tables listed because the CDT is referred to
within the PMT, rather than outside the PMT. Select Block CDT Output to
override the DPM PID map configuration for CDT PIDs and to always drop all
CDTs. Otherwise, clear the Block CDT Output to permit the output of CDTs
following the configured DPM PID map configuration and all other DPM
constraints.
9 From the PSI Regeneration Option drop-down list, choose whether to
regenerate the PSI tables to the output. You can choose Always to regenerate all
the tables or As Needed to only regenerate the tables if the content has changed.
10 Click OK.
11 Click Apply.
12 Click Copy To MOIP to copy all the DPM data from the ASI output to the MPEG
over IP output.
Configuring Transport Stream Information
219