Cisco D9824 Installation And Configuration Manual page 75

Program Status
Menu Item Description
PE Select the Program Entry number to
view.
SR Status This displays the status of an
alternate authorized
program/service from the same
transport stream when the receiver
is not authorized to view the
primary program. This is an uplink
initiated function that maps the
alternate service to the original
(primary) service PIDs, replacing
the original service with the
alternate service at the digital
transport output. No local
intervention is required by the
receiver operator for provision of
this service replacement feature.
SR Event Type Indicates the type of service
replacement event.
SR Event Start Displays the start time of the
service replacement event when
scheduled. Otherwise, the default
start time is displayed. The default
start time is 2007/09/01 00:00:00.
Parameters
PE1 to PE32
Not Started - Indicates that an event has
not started.
Primary - Indicates that a service
replacement event is active, but the
primary program is being displayed.
Alternate - Indicates that a service
replacement event is active, and that the
receiver has tuned to and is displaying
the alternate program/event as it is not
authorized to view the scheduled event.
None - Indicates that no service
replacement event is scheduled.
Scheduled - Indicates that all receivers
will tune to the alternate program at the
scheduled time. This status is applicable
to PE1 to PE32 programs.
CA - Indicates that only receivers
unauthorized to view the scheduled
program will tune to the alternate
program according to the selected
authorization tier bits. This status is
applicable to PE1 to PE32 programs.
Cue Trigger - Indicates that only
receivers authorized by the Cue Trigger
mask will tune to the scheduled
program/event.
Note: The Cue Trigger service
replacement event type is not
supported in the current release.
–
Status Menu
53