Cisco D9824 Installation And Configuration Manual page 98

Chapter 4 Front Panel Operation
Menu Item
SDT
PAT
Frequency Tuning
Status
Menu Item
Service List Mode
BAT
NIT
SDT
PAT
Frequency Tuning
76
Description
If using custom tune mode,
select whether to use the Service
Description Table (SDT) when
creating the service list.
If using custom tune mode,
select whether to use the
Program Association Table
when creating the service list.
If using custom tune mode,
select whether to use the NIT to
tune to other transports, or to
force the tuning to user
configuration settings.
Description
Indicates if all the expected
service list tables are present
(Rigorous) or only some of the
service list tables are present
(Degraded)
This is not supported in the
current release.
Indicates whether the Network
Information Table (NIT) is being
used to create the service list.
Indicates whether the Service
Description Table (SDT) is being
used to create the service list.
Indicates whether the Program
Association Table (PAT) is being
used to create the service list.
Indicates whether tuning is
using the NIT to tune to other
transports, or whether tuning is
forced to use the user selected
parameters.
Parameters
Yes or No
Yes or No
NIT - The receiver can change tuning
parameters to use all transports available
in the NIT.
User Cfg - The receiver is forced to use
the user selected tuning parameters.
Parameters
Degraded or Rigorous
No
Yes or No
Yes or No
Yes or No
NIT or User Cfg