Cisco D9824 Installation And Configuration Manual page 73

Menu Item Description
Pilot Present Indicates whether a Pilot is present for
the received signal. The Pilot is set on
the modulator for input signal
synchronization purposes.
C/N (dB) Indicates the current Carrier-to-Noise
ratio.
C/N Margin (dB) Indicates the current Carrier-to-Noise
Margin for the received signal. The
Carrier-to-Noise margin is the actual
distance that C/N is from the noise
threshold.
PER Indicates the current PER (Packet Error
Rate) of the received signal (DVB-S2).
PVBER Indicates the PV (Post-Viterbi) BER for
the received signal (DVB-S).
LDPCBER Indicates the LDPC (Low Density Parity
Check) error rate for the received signal
(DVB-S2).
AFC (MHz) Indicates the current Automatic
Frequency Control count.
UEC Indicates the current Uncorrected Error
Count for the received signal.
CEC Indicates the current Corrected Error
Count for the received signal (DVB-S).
Clear Counts Select this option to clear the error
counters.
ASI Link Indicates whether there is a transport
stream link error.
Transport Indicates the current transport
synchronization status.
Packet Size Indicates the packet size (in bytes) for
the ASI input.
Net Name Indicates the name assigned to the
network.
Status Menu
Parameters
Yes, No, or N/A
in dB
Values can be displayed in the
range of -32.0 to +30.0 dB.
–
–
–
in MHz
–
–
–
Error, Ok, or N/A
Error, Ok, or N/A
188, 204, or N/A
Up to 12 alphanumeric characters.
51