Cisco D9824 Installation And Configuration Manual page 153

Menu Item Description
Signal Lock Timer Select the time, in seconds, the unit must
wait for a signal lock before declaring that
the signal is not usable and move on to the
next search location in the search path. The
default is 30 seconds.
Verify Timer Select the time, in seconds, the unit must
wait for the PAT table to verify the signal
has a valid transport. The default is 60
seconds.
Backup Channel
Menu Item Description
PE # The Program Entry (PE) number you are
configuring the backup transport channel.
Transport The backup transport number you are
configuring the backup channel.
Backup Channel The backup channel number for the
selected backup transport.
Note: We recommend that you configure a minimum of one backup transport. If no backup
transport is configured, an alarm is triggered, but the unit will not be able to switch to a
backup transport.
Backup Transport
Menu Item Description
Backup The backup number
Active Indicates whether the selected backup is
enabled.
To activate a backup, press the ADV key
and press SELECT to insert. The Active
menu for the selected backup number
changes from No to Yes. Press APPLY to
save the changes.
To disable a backup, press the ADV key
and press the RIGHT arrow once and
press SELECT to select Delete. Press the
RIGHT arrow once and press SELECT to
select Continue. The Active menu for the
selected backup number changes from Yes
to No.
Setup Menu
Parameters
5 to 255 seconds
10 to 255 seconds
Parameters
PE1 to PE32
1, 2, or 3
Parameters
1, 2, or 3
Yes or No
131