Power And General Specifications; General; Power - Cisco D9824 Installation And Configuration Manual

Appendix A
Technical Specifications

Power and General Specifications

General

Item
LCD
Keypad
LEDs

Power

AC Power Connector
Item
Type of connector
AC input
Power (without LNB)
Current (without LNB)
Power Quality
Power
To operate the receiver, you must connect it to an AC power source.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible for
unplugging, if you need to switch off the unit. For example: Ensure that the socket
outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an earth-
grounded three-pin socket outlet only.
364
Specification
2 lines of 40 characters, backlit LCD.
Arrow keys, 0 to 9, SELECT, MENU, INFO,
ADV, MAP, APPLY and NAV keys.
Green LED for Signal status. Red LED for Alarm
indication.
Specification
IEC 320 style C14 appliance receptacle
100 to 240 VAC, 50/60 Hz
50W typ
0.45A @ 240 VAC typical, 0.7A @ 120 VAC
typical
ANSI/IEEE Std C62.41.1-2002