Table of Contents
Advertisement
a
Click Source Filter Setup. The Source Filter window opens.
b Click Add Row.
c
If White List is selected as the Source Filter, enter the IP address of a trusted
server the unit is allowed to receive streams. The unit is allowed to receive
streams from servers with IP addresses listed here.
If Black List is selected as the Source Filter, enter the IP address of a server
that is not trusted. The unit is allowed to receive streams from any server,
except for the servers with IP addresses listed here.
d Click Save.
e
Click OK. You can add up to 8 IP addresses.
8
Click Apply.
Configuring IP De-Jittering
The de-jittering engine has the ability to de-jitter two streams simultaneously (from
Data1 and Data2 ports), based on the selected PCR PID for each stream.
1
In the Input Setup page (Input > Input Setup), click the IP tab. Refer to the De-
Jitter Configuration area.
Setting up Input Information
161
- Quick Links:
- D9824 Advanced Multi Decryption Receiver
Hide quick links:
Advertisement
Table of Contents
