Cisco D9824 Installation And Configuration Manual page 264

Advanced multi decryption receiver
Table of Contents

Advertisement

Chapter 5 Web GUI Setup and Monitoring
6
Choose Transport Stream > Digital Program Mapping for ASI Output or
MPEG over IP Output. The ASI or MPEGoIP Digital Program Mapping page is
displayed.
7
In the DPM Program Entry Setup table, click Resynchronize All and click the
Resynchronize Program, PMT PID, ES List & ES PIDs radio button and click
OK. This copies the input services PIDs to the remapped output service PIDs.
8
In the DPM Program Entry Setup table, choose the PE containing the channel
you want to configure and click Edit. The DPM PE PID MAP window is
displayed.
9
Click Add Row.
10 From the Action drop-down list, choose Pass, Drop, or Map.
11 Choose the input to output channel mapping from the Category drop-down list.
Video and PCR can be output on the same PID or different PIDs. If output on the
same PID, they will appear identical to the input.
12 Click Save.
13 Click OK.
14 In the DPM General Setting area, choose the following parameters:
Setting
Remapping Mode
Duplication Method
Unreferenced Content
Service ID Output
PSI Table Output Option
PSI Regeneration Option
15 Click Table Options. The DPM Table Options window is displayed.
16 Set the following parameters:
Parameter
PAT
CAT
PMT
TSDT
NIT
NITO
SDT
SDTO
BAT
242
Parameter
Svc ID & PID
Pkt Copy
Drop
Valid Ch/All Ch
Ctl By Table
Always/As Needed
Description
Regen
Regen
Regen
Drop
Regen or Drop
Drop
Regen
Drop
Drop

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents