Cisco D9824 Installation And Configuration Manual page 200

Chapter 5 Web GUI Setup and Monitoring
The Signal Lock Timer, Signal Loss Timer, and Verification Timer fields display
the signal lock, signal loss, and verification periods set on the Disaster Recovery
Setup page if the Configured By field is set to User. If the Configured By field is set
to Uplink, the disaster recovery profile settings from the PNC uplink are displayed.
But if the unit is not connected to the uplink, the default values of the unit are
displayed. For more information, contact your PNC uplink administrator.
The Backup Transport area displays the tuning parameters of the current origin and
backup transports configured. For example, if only Backup 1 and Backup 3 are
configured, the table will display the tuning parameters for Origin, Backup 1, and
Backup 3. The Configured By row indicates that the backup transport is configured
by a user.
The Search Path area displays the channel numbers assigned to the Origin and
Backup transports for PE1 to PE32.
178