Cisco D9824 Installation And Configuration Manual page 358

Chapter 6 Service and Maintenance
Warning Message
Type
Restore Failure Set
Reason
Restore Failure Set
Reason
SDI Aud SFR Set
Data
SDI Aud SFR Clear
Data
336
Message Cause/Remedy
Not Accepted Cause: Import file is
either for a different
product or the structure
was not compatible with
this unit.
Remedy: Verify that the
correct import file is
being used and was
created by this product,
and that the file
structure has not been
corrupted. If the
problem persists, notify
Cisco Services.
Bad Content Cause: Import file may
be corrupted, or from a
different version of
application software.
Remedy: Verify that the
correct import file is
being used and was
created by this product,
and that the file
structure has not been
corrupted. If the
problem persists, notify
Cisco Services.
SDI Audio Cause: The SDI audio
sampling groups are not
frequency configured correctly, or
the transport stream has
mismatch
changed the sampling
rate of one of the audio
streams.
Remedy: Configure the
SDI audio groups to
ensure that all audio
channels in a group
have the same sampling
frequency rate.
SDI Audio SFR –
Mismatch
Cleared
Description
Import file was
rejected and import
did not occur
Item in import file is
not valid for this
software and import
did not occur
All audio channels in a
given audio group
within an SDI do not
have identical
sampling rate.
–
ID
89100
89100
90000
90000