Cisco D9824 Installation And Configuration Manual page 85

Menu Item
LCD Contrast
DL Mode
Limit Version
DL Status
Description
Adjusts the contrast of the LCD
menu panel.
Set the unforced over-the-air
download mode.
Indicates the oldest version of the
application that can be installed on
the current unit. Older
applications will not be installed.
Indicates the current download
state.
Parameters
1 (lowest contrast) to 30 (highest
contrast)
Always - Unforced download
will be accepted and saved in
memory.
Once - An unforced download
will be accepted, followed by a
reboot of the receiver, and the
DL Mode will change to Never.
Never - Unforced downloads
will not be accepted.
Note: Forced downloads
(initiated by the uplink) are
always accepted and always
result in a reboot of the receiver.
Service interruption will occur!
Read-only alphanumeric value
Init - Download component is
being initialized. You cannot
perform a download while in
this state.
Ready - Download component
is ready to receive downloads.
Buffer - Download in progress.
The CDTs are being received.
Program - The application is
being written to flash.
Swap - The IRD is swapping to
a new application and it will
reboot.
Shutdown - The IRD is shutting
down and it will reboot.
App Erase - An application is
being erased from the flash.
FPGA Erase - A Field
Programmable Gate Array
(FPGA) code is being erased
from the flash.
Setup Menu
63