Cisco D9824 Installation And Configuration Manual page 86

Chapter 4 Front Panel Operation
Menu Item
Type
Bank
CDT#
Recv
Reject
Command
64
Description
The type of download being
performed.
The type of code being
downloaded.
Indicates the total number of
expected code tables in the current
download.
Displays the number of code tables
received since the last completed
or aborted download, or power-
cycle.
Displays the number of code tables
rejected. Tables are rejected
whenever validation fails due to
things like CRC failure or incorrect
code or receiver type.
Select a command to issue to the
current download. This command
is for over-the-air downloads only.
It has no effect on the rear panel or
HTTP downloads.
Parameters
None - No download is being
performed.
Rear Panel - The rear panel
download is being performed.
HTTP - An HTTP download
from the web GUI is being
performed.
Over Air - An over-the-air
download is being performed.
App 5514 - Currently
downloading code for app5514
on the HDR/HDR2 board.
App 7109 - Currently
downloading code for app7109
on the HDR/HDR2 board.
FPGA 7109 - Currently
downloading FPGA code to the
HDR/HDR2 board.
Note: The FPGA download
does not occur over-the-air.
Read-only numeric value.
Read-only numeric value.
Read-only numeric value.
Abort - Stops a download that
is currently being received.
Restart - Restarts a previously
aborted download.
Note: that the download does
not resume from where it was
aborted, but restarts from the
beginning.
None - No action is to be
performed.