Status Menu: Services - Cisco D9824 Installation And Configuration Manual

Chapter 4 Front Panel Operation
Menu Item
Browse
Clear All
Current Date and
Time
Current TDT Date
and Time
Current SNTP Date
and Time

Status Menu: Services

Video
Menu Item
Video
Rate (Mbps)
3:2 Pulldown
48
Description
Select to view the current active alarms
and warnings, including additional details.
Select to clear all the active alarms and
warnings. You will be prompted to verify
whether you want to clear all the alarms
and warnings.
Displays the current SNTP date and time,
if available. Otherwise, the current TDT
date and time is displayed.
Note: This is displayed as local time.
Displays the current TDT (Time and Date
Table) date and time received from the
DVB stream.
Note: This is displayed as local time.
Displays the current SNTP (Simple
Networking Time Protocol) date and time
if IRD receives a valid reply from the NTP
server.
Note: This is displayed as local time.
Description
Indicates the video encoding, format,
and resolution of the received
program.
Indicates the bit rate of the received
video stream, in Mbps.
Indicates whether the 3:2 pulldown is
detected, was recently detected, or
not detected in the input video
stream.
Parameters
–
Abort, Continue. Select Abort to
cancel the operation or Continue
to clear all the warnings and
alarms.
–
–
–
Parameters
MPEG1, MPEG2, or H264 format
with a resolution of: SD480i/2997,
SD480i/3000, SD576i/2500,
HD720p/5000, HD720p/5994,
HD720p/6000, HD1080i/2500,
HD1080i/2997, or HD1080i/3000
Unknown, or Unsupported
–
Yes, No or Recent