Cisco D9858 Installation And Configuration Manual page 303

Alarm Message
Type
PE n: Loss of Clear
Input
Digital Program Set
Mapping
Digital Program Set
Mapping
Digital Program Set
Mapping
Message Cause/Remedy
Fault reset –
PID Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink to
find the
appropriate system
settings.
Program Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink to
find the
appropriate system
settings.
Mode-i PMT out of Cause: Uplink
settings may have
range
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink to
find the
appropriate system
settings.
Description Severity
– Minor
Two source Minor
service PIDs
are being
mapped to the
same output
PID. This will
cause data
corruption in
the stream.
Two source Minor
channel
numbers are
being
mapped/
passed to the
same channel
number in the
output.
PMT PID to be Major
used for
Mode-i is
outside of
valid MPEG
PID range.
ID
11000
12000
13000
14000
15000
16000
17000
18000
18009-18032
19000
19000
19000
281