Factory Default Settings And Lock Levels; Administration - Cisco D9858 Installation And Configuration Manual

Appendix B
Default Settings and Lock Levels

Factory Default Settings and Lock Levels

The D9858 Advanced Receiver Transcoder is factory configured with default settings
unless you have requested a custom factory configuration.
The following table lists the lock levels available for protecting your transcoder and
its settings against unauthorized use or modification:
Level
0
1
2
3
4
If a change made to the current Lock Level setting is not saved, the previously saved setting
is restored.
Note: The user cannot select NONE as a Lock Level.

Administration

Parameter
Lock Level
Password
Old Pwd, New Pwd, Confirm
Pwd
Factory Reset
Clear FWD Tables
KB Lock
KB Lock Timeout
LCD Contrast
DL Mode
Type
Bank
348
Description
All settings are unlocked (transcoder lockout disabled)
All settings are unlocked except Factory Reset,
Password options and transcoder parameters.
All settings are unlocked except RF and ASI Input
Tuning parameters.
All settings locked (access via password only), except IP
address and RF power.
All settings locked (can be changed via PNC uplink
signal only)
Default
0
1234
N/A
N/A
N/A
Disable
60
30
Always
None
App 5514
Lock Level
3
3
0
0
0
2
2
2
2
N/A
N/A