Setting Up Audio Parameters - Cisco D9858 Installation And Configuration Manual

Setting up Audio Parameters

1 From the user interface of the D9858, choose Audio & Video > Audio Decoding.
The Audio Decoding page is displayed.
2 The Audio Selection area allows you to select the audio PID for audio decoding.
The D9858 supports two local audio devices.
a In the Select By drop-down list, choose the input source for Audio 1 or
Audio 2.
Note: You cannot select PMT order for one audio and Language List or
Language Entry for the other audio. For example, you cannot select PMT
Order for Audio 1 and Language List for Audio 2.
b If Language List is selected, you must choose a language from the Language
List drop-down list. If Language Entry is selected, you must a language code
in the Manual Entry field. If the languages selected are different, the first PID
with the matching language will play on the appropriate audio device
(Audio 1 or Audio 2). If you select the same language for both Audio 1 and
Audio 2, the PIDs are mapped as follows: the first matching language PID to
Audio 1 and the second matching PID to Audio 2.
c If PMT Order is selected, you must set the PMT order for each audio (None,
AUD1 to AUD64). You cannot select the same PID for both audio devices. If
you select the same instance of an audio PID for one of the audio devices, the
other audio device PID instance will automatically increment by one. For
example, Audio 1 is set to AUD1 and Audio 2 is set to AUD2. If you change
Audio 1 source to AUD2, the Audio 2 source will automatically change to
AUD3 to resolve the conflict.
Setting up Audio and Video Information
181